-
IT café
ASUS WL-500G Premium
Új hozzászólás Aktív témák
-
norbszt
tag
válasz Intruder2k5 #15799 üzenetére
helló
Asus rt-n13u-m van dd-wrt-vel a sambat és a Transmission-daemon az sikerult megoldanom ez alapján :http://ocsovszki-dorian.darkhole.hu/?page_id=397
és még kéne a fewgets a http és a rapidshare letöltés miatt
probáltam e szerint de nem sikerült: http://wl500g.info/showthread.php?t=21041
probálkoztam ezel is :http://logout.hu/tema/asus_wl500g_premium/hsz_9362-9362.html
aztán ujra keztem az egészet
samba müködik
Transmission-daemon müködikkövetkezöket tetem:
ipkg install lighttpd
ipkg install php-fcgi
hiba nélkül fel ment
nano /opt/etc/lighttpd/lighttpd.conf
# lighttpd configuration file
#
# use it as a base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf 8860 2008-08-05 10:56:16Z engy $############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
"mod_scgi",
"mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )## a static document-root, for virtual-hosting take look at the
## server.virtual-* options
server.document-root = "/opt/share/www/"## where to send error-messages to
server.errorlog = "/opt/share/www/error.log"# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm",
"lighttpd/index.html" )## set the event-handler (read the performance section in the manual)
# server.event-handler = "freebsd-kqueue" # needed on OS X# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar"
)# Use the "Content-Type" extended attribute to obtain mime type if possible
#mimetype.use-xattr = "enable"## send a different Server: header
## be nice and keep it at lighttpd
# server.tag = "lighttpd"#### accesslog module
accesslog.filename = "/opt/share/www/access.log"## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}##
# which extensions should not be handle via static-file transfer
#
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".fcgi", ".php", ".pl", ".py", ".rb", ".cgi"$######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
server.port = 8081## bind to localhost (default: all interfaces)
#server.bind = "grisu.home.kneschke.de"## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"## to help the rc.scripts
server.pid-file = "/var/run/lighttpd.pid"###### virtual hosts
##
## If you want name-based virtual hosting add the next three settings and load
## mod_simple_vhost
##
## document-root =
## virtual-server-root + virtual-server-default-host + virtual-server-docroot
## or
## virtual-server-root + http-host + virtual-server-docroot
##
#simple-vhost.server-root = "/home/weigon/wwwroot/servers/"
#simple-vhost.default-host = "grisu.home.kneschke.de"
#simple-vhost.document-root = "/pages/"##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
#server.errorfile-prefix = "/home/weigon/projects/lighttpd/doc/status-"## virtual directory listings
#dir-listing.activate = "enable"## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"### only root can use these options
#
# chroot() to directory (default: no chroot() )
#server.chroot = "/"## change uid to <uid> (default: don't care)
#server.username = "nobody"## change uid to <uid> (default: don't care)
#server.groupname = "nobody"#### compress module
#compress.cache-dir = "/tmp/lighttpd/cache/compress/"
#compress.filetype = ("text/plain", "text/html")#### proxy module
## read proxy.txt for more info
#proxy.server = ( ".php" =>
# ( "localhost" =>
# (
# "host" => "192.168.0.101",
# "port" => 80
# )
# )
# )#### fastcgi module
## read fastcgi.txt for more info
fastcgi.server = ( ".php" =>
((
"host" => "192.168.1.1",
"port" => 1026,
))
)#### CGI module
cgi.assign = ( ".cgi" => "/bin/sh",
".pl" => "/opt/bin/perl" )scgi.server = ("/RPC2" =>
( "127.0.0.1" =>
(
"host" => "127.0.0.1",
"port" => 5000,
"check-local" => "disable"
)
)
)#### SSL engine
#ssl.engine = "enable"
#ssl.pemfile = "server.pem"
#ssl.ca-file = "ca.crt"
#ssl.verifyclient.activate = "enable"
#ssl.verifyclient.enforce = "enable"
#ssl.verifyclient.depth = 1#### status module
#status.status-url = "/server-status"
#status.config-url = "/server-config"#### auth module
## read authentication.txt for more info
#auth.backend = "plain"
#auth.backend.plain.userfile = "lighttpd.user"
#auth.backend.plain.groupfile = "lighttpd.group"#auth.backend.ldap.hostname = "localhost"
#auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
#auth.backend.ldap.filter = "(uid=$)"#auth.require = ( "/server-status" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "user=jan"
# ),
# "/server-config" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "valid-user"
# )
# )#### url handling modules (rewrite, redirect, access)
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
#### both rewrite/redirect support back reference to regex conditional using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}#
# define a pattern for the host url finding
# %% => % sign
# %0 => domain name + tld
# %1 => tld
# %2 => domain name without tld
# %3 => subdomain 1 name
# %4 => subdomain 2 name
#
#evhost.path-pattern = "/home/storage/dev/www/%3/htdocs/"#### expire module
#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "a$#### ssi
#ssi.extension = ( ".shtml" )#### rrdtool
#rrdtool.binary = "/opt/bin/rrdtool"
#rrdtool.db-name = "/var/www/lighttpd.rrd"#### setenv
#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
#setenv.add-response-header = ( "X-Secret-Message" => "42" )## for mod_trigger_b4_dl
# trigger-before-download.gdbm-filename = "/home/weigon/testbase/trigger.db"
# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
# trigger-before-download.trigger-url = "^/trigger/"
# trigger-before-download.download-url = "^/download/"
# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
# trigger-before-download.trigger-timeout = 10## for mod_cml
## don't forget to add index.cml to server.indexfiles
# cml.extension = ".cml"
# cml.memcache-hosts = ( "127.0.0.1:11211" )#### variable usage:
## variable name without "." is auto prefixed by "var." and becomes "var.bar"
#bar = 1
#var.mystring = "foo"## integer add
#bar += 1
## string concat, with integer cast as string, result: "www.foo1.com"
#server.name = "www." + mystring + var.bar + ".com"
## array merge
#index-file.names = (foo + ".php") + index-file.names
#index-file.names += (foo + ".php")#### include
#include /etc/lighttpd/lighttpd-inc.conf
## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
#include "lighttpd-inc.conf"ujra inditom a lighttpd
/opt/etc/init.d/S80lighttpd restart
és ez a hiba
Starting web server: lighttpd
Duplicate config variable in conditional 0 global: fastcgi.server
2010-11-19 21:01:39: (configfile.c.912) source: cat /opt/etc/lighttpd/conf.d/*.conf line: 15 pos: 1 parser failed somehow near here: (EOL)
2010-11-19 21:01:39: (configfile.c.912) source: /opt/etc/lighttpd/lighttpd.conf line: 348 pos: 1 parser failed somehow near here: (EOL)már minden probálgatam de egyszerüen nem megy
Hol a hiba?
Új hozzászólás Aktív témák
● Olvasd el az összefoglalót!
- Bugok, problémák a PROHARDVER lapcsaládon
- Automata kávégépek
- Vallás
- Synology NAS
- Poco X6 Pro - ötös alá
- Büszke apukák és anyukák topikja
- Vezetékes FÜLhallgatók
- DIGI kábel TV
- A fociról könnyedén, egy baráti társaságban
- Témázgatunk, témázgatunk!? ... avagy mutasd az Android homescreened!
- További aktív témák...
- GARIS!! Gamer PC/Ryzen 5 2600/RTX 2060S 8 GB/16 GB/250 SSD/1 TB HDD
- AKCIÓ!!! Gigabyte GAMER G5 KD i5-11400H 32GB RAM 2x1000GB NVMe SSD RTX 3060 6GB 15" 144Hz
- AKCIÓ!!! Gigabyte GAMER G5 KD i5-11400H 16GB RAM 512GB NVMe SSD RTX 3060 6GB 15" 144Hz
- 11900KF / 32GB 3600MHZ CL16 / 3080 TI Suprim X
- EPSON TM-t20II blokk nyomtató
Állásajánlatok
Cég: Ozeki Kft.
Város: Debrecen
Cég: Ozeki Kft.
Város: Debrecen