-
IT café
ASUS WL-500G Premium
Új hozzászólás Aktív témák
-
ecaddict
senior tag
válasz Tutu7030 #11991 üzenetére
Nem tudom mennyire van kedved (gondolom semennyire; inkább mennyire fontos ez neked), hogy megtaláld a forrását a dolognak.
Amiből ki lehetni indulni az ez a sor (annak is a legvége):
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000Ha letöltöd az Oleg forrását akkor a ../broadcom/src/linux/linux-2.4.37.7/drivers/scsi/
könyvtárban van egy scsi.h, ahol a megfejtése van a hibakódnak:
/*
* Use these to separate status msg and our bytes
*
* These are set by:
*
* status byte = set from target device
* msg_byte = return status from host adapter itself.
* host_byte = set by low-level driver to indicate status.
* driver_byte = set by mid-level.
*/
#define status_byte(result) (((result) >> 1) & 0x1f)
#define msg_byte(result) (((result) >> 8) & 0xff)
#define host_byte(result) (((result) >> 16) & 0xff)
#define driver_byte(result) (((result) >> 24) & 0xff)
#define suggestion(result) (driver_byte(result) & SUGGEST_MASK)Ez a 7-es érték a host_byte részen van.
/*
* the return of the status word will be in the following format :
* The low byte is the status returned by the SCSI command,
* with vendor specific bits masked.
*
* The next byte is the message which followed the SCSI status.
* This allows a stos to be used, since the Intel is a little
* endian machine.
*
* The final byte is a host return code, which is one of the following.
*
* IE
* lsb msb
* status msg host code
*
* Our errors returned by OUR driver, NOT SCSI message. Or'd with
* SCSI message passed back to driver <IF any>.
*/#define DID_OK 0x00 /* NO error */
#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
#define DID_BAD_TARGET 0x04 /* BAD target. */
#define DID_ABORT 0x05 /* Told to abort for some other reason */
#define DID_PARITY 0x06 /* Parity error */
#define DID_ERROR 0x07 /* Internal error */
#define DID_RESET 0x08 /* Reset by somebody. */
#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
#define DRIVER_OK 0x00 /* Driver status */Ez egy driver error. A driver valamiért nem tudja olvasni a diszket, ugye ez van a logban:
I/O error: dev 08:00, sector 0Anno emlékszem, hogy valamelyik régi Oleg nem tudta kezelni a hub-ot, ha volt rajta USB1.1-es cucc is.
Kérdések:
Ugye a legújabb Oleget használod (r1000)?
Mindenféleképpen kell a hub (nincs a rack-nek tápcsatija ahol tudnál tápot adni)?
Van a hub-on még más is?Ha a legújabb Oleg-et használod, lehetni új issue-t is nyitni.
[ Szerkesztve ]
### RT-N16, WL-500 Oleg optware script ami majdnem mindent feltesz ### ===========> http://wl500g.info/showthread.php?t=23684 <===========
Új hozzászólás Aktív témák
● Olvasd el az összefoglalót!
- LG OLED55C37LA GYÁRI GARANCIA 3 ÉV
- APPLE Mac Studio M1 Max 10C CPU, 24C GPU, 32G RAM, 512GB SSD
- Kingston A400 960GB (SA400S37/960G)
- Ohh! HP EliteBook 840 G6 Fémházas Laptop 14" -70% i5-8365U 4Mag 16GB 512GB SSD FHD IPS + Táska!
- Szép! HP EliteBook 840 G6 Fémházas Laptop 14" -70% i5-8365U 4Mag 8GB 512GB SSD FHD IPS + Táska!
Állásajánlatok
Cég: Ozeki Kft.
Város: Debrecen