Keresés

Új hozzászólás Aktív témák

  • HXY

    addikt

    Hellosztok!

    Látom többen is használtok DD-WRT-t és annak a cron funkcióját.

    Van rá mód, hogy minden nap 00:00-kor kikapcsolja a WiFi-t, majd 06:00-kor be?

  • HXY

    addikt

    válasz Oyabun #2949 üzenetére

    Kicsit kínai nekem... :))

    Mit kell beírjak, és hova, hogy minden nap 00:00-kor kikapcsolja a WiFi-t, majd 06:00-kor be?

  • HXY

    addikt

    válasz vidlici #2960 üzenetére

    Jó lenne nekem a Tomato is, de sajna csak DD-WRT-t tudok rárakni.. (Fon2100)

  • HXY

    addikt

    Ha valaki meg szeretné tudni, hogy v1, vagy v2 van a birtokában, az nyissa meg a

    http://192.168.1.1/Main_AdmStatus_Content.asp

    -t, majd ezt írja be:

    cat /proc/cpuinfo

    Ha BCM4704 vagy BCM4780 -> akkor V1 (264MHz)
    Ha BCM5354 -> akkor V2 (240MHz)

  • HXY

    addikt

    válasz luise178 #6728 üzenetére

    valamiért az asus programmal nekem se ment, pedig minden tűzfalat kikapcsoltam.
    a webes felületen keresztül kábeles összeköttetéssel harmadszorra sikerült.
    (előtte mindig azt írta ki,h. a lap nem jeleníthető meg.)

    én majd úgy akarom használni, hogy belerakok egy pendrive-ot (2GB),
    ezen lesznek a programok, és a swap.

    meg van egy msi starbox házam hitachi vinyóval, amit külső táppal megtámgatok.
    ezt ext3-ra formázom, és csak néha napján lenne bedugva a routerbe.

    azt hittem, hogy a ma délelőttöt rászánom és már menni is fog minden... hát nem :)

  • HXY

    addikt

    válasz Intruder2k5 #6787 üzenetére

    még nem nagyon mélyedtem bele, azért lehet h. hülyeséget kérdezek... :B

    itt nincs cronjob?

  • HXY

    addikt

    válasz DLDKox #6916 üzenetére

    virtuális ssid-t csak dd-wrt és tomato alatt tud a wl-500g, vagy tudja oleg alatt is?

  • HXY

    addikt

    válasz ecaddict #6919 üzenetére

    Jelenleg én is wifin keresztül kapom a netem.
    Van egy Fon 2200 DD-WRT-vel ami kliensként veszi a netet.
    Ebbe van bedugva a WL-500g, ami továbbosztja.
    A kis Fon-nal meg tudtam csinálni, hogy Wifin kapja, majd egyúttal egy másik SSID-n ossza tovább.
    Ezt lenne jó megcsinálni az Asus-szal, mert akkor nem kéne 2 eszköznek mennie.

  • HXY

    addikt

    Használja valaki ilyen HDD házzal? Asus Vento

    Van hozzá tápegység? Tápbemenet?

    Azt hallottam, hogy egyes típusokkal nem megy.
    A táp meg azért lenne jó, mert szerintem nem tenne jót a routernek, ha onnan venné az energiát.

    [ Szerkesztve ]

  • HXY

    addikt

    Laca 012 & sanzi89:
    Tegnap 2700 Ft-ért vettem egy Belkin usb hubot, így a vinyó tápellátása megoldva.
    A ház egy MSI StarBox, benne egy 160-as Hitachi notivinyó.

    Most felraktam Intruder2k5 elmentett image-t.
    https://asus/ oldalról WLAN-on keresztül egyedül a WGET WEBUI jön be.
    Az rtorrent idő túllépést ír, a többi meg be se jön.

    Mi lehet a baj?

  • HXY

    addikt

    válasz Intruder2k5 #6952 üzenetére

    [B]df[/B]
    Filesystem 1K-blocks Used Available Use% Mounted on
    rootfs 3072 3072 0 100% /
    /dev/root 3072 3072 0 100% /
    /dev/discs/disc0/part1
    972532 118752 803580 13% /opt
    /dev/discs/disc0/part3
    149930756 68084 142123760 1% /opt/etc/samba/Share



    [B]ps -ax[/B]
    Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
    PID TTY STAT TIME COMMAND
    1 ? S 0:01 /sbin/init
    2 ? S 0:00 [keventd]
    3 ? RN 0:19 [ksoftirqd_CPU0]
    4 ? S 0:00 [kswapd]
    5 ? S 0:00 [bdflush]
    6 ? S 0:00 [kupdated]
    7 ? S 0:00 [mtdblockd]
    57 ? S 0:00 telnetd
    62 ? S 0:05 httpd vlan1
    65 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
    68 ? S 0:00 klogd
    71 ? Ss 0:01 nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
    73 ? S 0:01 [dnsmasq]
    75 ? S 0:00 [khubd]
    84 ? Ss 0:00 lpd
    86 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
    89 ? Ss 0:00 waveservermain
    92 ? Ss 0:00 rcamdmain
    96 ? S 0:00 [usb-storage-0]
    97 ? S 0:00 [scsi_eh_0]
    107 ? Ss 0:00 infosvr br0
    108 ? Ss 0:00 watchdog
    110 ? Ss 0:00 ntp
    119 ? S 0:00 [kjournald]
    123 ? S 0:00 [kjournald]
    129 ? S 0:00 dropbear
    133 ? Ss 0:00 /opt/sbin/cron
    140 ? S 0:03 /opt/sbin/lighttpd -f /opt/etc/lighttpd/lighttpd.conf
    148 ? Ss 0:00 /usr/sbin/smbd -D -l /opt/var/log/smbd.log -s /opt/et
    150 ? Ss 0:00 /usr/sbin/nmbd -D -n ASUS -o -l /tmp -s /opt/etc/samb
    179 ? Ss 0:00 /opt/bin/SCREEN -dm -S rtorrent
    181 pts/0 Ss+ 0:00 /bin/sh
    310 ? S 0:00 udhcpc -i vlan1 -p /var/run/udhcpc0.pid -s /tmp/udhcp
    1341 ? S 0:00 upnp -D -L br0 -W vlan1
    1615 pts/1 Ss 0:00 -sh
    1619 pts/1 R+ 0:00 ps -ax



    [B]ls -l /opt/etc/samba/Share/www[/B]
    total 36
    drwxr-xr-x 8 nobody nobody 4096 Feb 18 19:39 aega
    drwxr-xr-x 3 nobody nobody 4096 Feb 18 18:40 cgi-bin
    drwxr-xr-x 2 nobody nobody 4096 Feb 18 18:40 images
    -rwxr--r-- 1 nobody nobody 9423 Feb 18 18:00 index.htm
    drwxr-xr-x 2 nobody nobody 4096 Feb 18 18:40 phpinfo
    drwxr-xr-x 7 nobody nobody 4096 Feb 18 18:40 rtorrent
    drwxr-xr-x 2 nobody nobody 4096 Feb 18 19:50 vnstat

  • HXY

    addikt

    válasz Intruder2k5 #6956 üzenetére

    /opt/etc/init.d/S99rtorrent restart

    Restarting rtorrent
    iptables: Bad rule (does a matching rule exist in that chain?)
    User defined signal 1
    User defined signal 1
    User defined signal 1
    .

    /opt/etc/samba/Share/www_log/error.log

    1970-01-01 01:00:10: (log.c.97) server started
    1970-01-01 12:27:35: (server.c.1465) server stopped by UID = 0 PID = 1
    1970-01-01 01:00:11: (log.c.97) server started
    1970-01-01 01:19:50: (http_auth.c.876) get_password failed
    1970-01-01 01:20:01: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:01: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:01: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:01: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:01: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:01: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:20:01: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:01: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:01: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:01: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:01: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:01: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:20:15: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:15: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:15: (mod_fastcgi.c.2722) child signaled: 11
    - /opt/etc/samba/Share/www_log/error.log 1/112 0%
    1970-01-01 01:00:10: (log.c.97) server started
    1970-01-01 12:27:35: (server.c.1465) server stopped by UID = 0 PID = 1
    1970-01-01 01:00:11: (log.c.97) server started
    1970-01-01 01:19:50: (http_auth.c.876) get_password failed
    1970-01-01 01:20:01: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:01: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:01: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:01: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:01: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:01: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:20:01: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:01: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:01: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:01: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:01: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:01: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:01: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:20:15: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:15: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:15: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:15: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:15: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:15: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:15: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:15: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:20:15: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:20:15: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:20:15: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:20:15: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:20:15: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:20:15: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:20:15: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:20:15: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:25:51: (server.c.1465) server stopped by UID = 0 PID = 1
    1970-01-01 01:00:11: (log.c.97) server started
    1970-01-01 01:01:46: (connections.c.290) SSL: 1 error:14094415:SSL routines:SSL3
    1970-01-01 01:01:53: (connections.c.290) SSL: 1 error:14094415:SSL routines:SSL3
    1970-01-01 01:01:56: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:01:56: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:01:56: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:01:56: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:01:56: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:01:56: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:01:56: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:01:56: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:01:56: (mod_fastcgi.c.1768) connect failed: Connection refused on
    1970-01-01 01:01:56: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 s
    1970-01-01 01:01:56: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:01:56: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi
    1970-01-01 01:01:56: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:01:56: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, d
    1970-01-01 01:01:56: (mod_fastcgi.c.1072) If this is PHP, try removing the bytec
    1970-01-01 01:01:56: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:02:18: (mod_fastcgi.c.1768) connect failed: Connection refused on
    - /opt/etc/samba/Share/www_log/error.log 1/112 0%
    1970-01-01 01:01:56: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:02:18: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-1
    1970-01-01 01:02:18: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 3
    1970-01-01 01:02:18: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:02:18: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    1970-01-01 01:02:18: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:02:18: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    1970-01-01 01:02:18: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    1970-01-01 01:02:18: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:02:18: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0
    1970-01-01 01:02:18: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 1 load: 3
    1970-01-01 01:02:18: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:02:18: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    1970-01-01 01:02:18: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:02:18: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    1970-01-01 01:02:18: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    1970-01-01 01:02:18: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:02:47: (connections.c.290) SSL: 1 error:14094415:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate expired
    1970-01-01 01:02:50: (connections.c.290) SSL: 1 error:14094415:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate expired
    1970-01-01 01:02:52: (connections.c.290) SSL: 1 error:14094415:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate expired
    1970-01-01 01:05:52: (server.c.1465) server stopped by UID = 0 PID = 1
    1970-01-01 01:00:10: (log.c.97) server started
    1970-01-01 01:00:48: (http_auth.c.876) get_password failed
    1970-01-01 01:00:58: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-3
    1970-01-01 01:00:58: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1
    1970-01-01 01:00:58: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:00:58: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    1970-01-01 01:00:58: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:00:58: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    1970-01-01 01:00:58: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    1970-01-01 01:00:58: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    1970-01-01 01:00:58: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-2
    1970-01-01 01:00:58: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 1 load: 1
    1970-01-01 01:00:58: (mod_fastcgi.c.2722) child signaled: 11
    1970-01-01 01:00:58: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    1970-01-01 01:00:58: (mod_fastcgi.c.1065) terminated by signal: 11
    1970-01-01 01:00:58: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    1970-01-01 01:00:58: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    1970-01-01 01:00:58: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    2009-04-18 09:17:43: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-1
    2009-04-18 09:17:43: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 3
    2009-04-18 09:17:43: (mod_fastcgi.c.2722) child signaled: 11
    2009-04-18 09:17:43: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    2009-04-18 09:17:43: (mod_fastcgi.c.1065) terminated by signal: 11
    2009-04-18 09:17:43: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    2009-04-18 09:17:43: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    2009-04-18 09:17:43: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    2009-04-18 09:17:43: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0
    2009-04-18 09:17:43: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 1 load: 3
    2009-04-18 09:17:43: (mod_fastcgi.c.2722) child signaled: 11
    2009-04-18 09:17:43: (mod_fastcgi.c.1051) the fastcgi-backend /opt/bin/php-fcgi failed to start:
    2009-04-18 09:17:43: (mod_fastcgi.c.1065) terminated by signal: 11
    2009-04-18 09:17:43: (mod_fastcgi.c.1070) to be exact: it segfaulted, crashed, died, ... you get the idea.
    2009-04-18 09:17:43: (mod_fastcgi.c.1072) If this is PHP, try removing the bytecode caches for now and try again.
    2009-04-18 09:17:43: (mod_fastcgi.c.2759) ERROR: spawning fcgi failed.
    2009-04-18 09:42:13: (http_auth.c.876) get_password failed
    2009-04-18 09:42:23: (http_auth.c.876) get_password failed

    Ez a FW van fent: Oleg 1.9.2.7-10.

    Mindenhol root a felhasználóvevem.

  • HXY

    addikt

    válasz atesss #6957 üzenetére

    Szívesen!
    Én a wl-500g-men még nem próbáltam a DD-WRT-t.
    WRT54GL és Fon2100/2200 alatt igen, és csak jót tudok mondani róla.
    Szerintem használd a dd-wrt.v24_mega_generic-et, mert a leírás is az alápján készült.

  • HXY

    addikt

    válasz Intruder2k5 #6961 üzenetére

    azért köszi a segítséget! megpróbálom resetelni, majd újrarakni az imageket.

    atesss:
    http://airfart.blogspot.com/2008/04/how-to-set-client-mode-on-dd-wrt.html
    http://www.wi-fiplanet.com/tutorials/article.php/3639271 (itt kliens bridget-et ajánlanak)
    De nekem sima kliensként is szépen ment.

  • HXY

    addikt

    válasz Intruder2k5 #6967 üzenetére

    Nyomtam neki egy resetet, a routeren mindent alap beállításon hagytam.
    A vinyóról letöröltem minden particiót, majd a ghost 11.5-tel visszaállítottam a 3 particiót.
    A parancsokat lépésről lépésre ctrl-c ctrl-v-ztem.
    De továbbra is ugyanazokat a hibákat produkálja :(

  • HXY

    addikt

    válasz Intruder2k5 #6972 üzenetére

    ezzel a ghost-al csináltam: Symantec.Ghost.v11.5.0.2113.Corporate.Edition

    ugye az teljesen mindegy, hogy ssh-n vagy telneten adom ki a parancsokat?
    más: telnet alatt a midnight commanderben nem tudok a nyílakkal lépkedni (betűket írkál), de ssh alatt igen.

    ipkg update

    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/Packages.gz
    User defined signal 1
    An error ocurred, return value: 1.
    Collected errors:
    ipkg_download: ERROR: Command failed with return value 138: `wget -q -P /opt/ipkg-j4q2zN http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/Packages.gz'
    User defined signal 1

    [ Szerkesztve ]

  • HXY

    addikt

    válasz Intruder2k5 #6978 üzenetére

    Akkor holnap nekiállok, és sptep-by-step előlről kezdek mindent. :U
    Egyszer csak összejön. :D

  • HXY

    addikt

    Szeretnék egy kis segítséget kérni!

    Lecseréltem az eredeti /opt/etc/ipkg.conf tartalmát. Most ez van benne:

    src/gz optware http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable
    dest /opt/ /

    Ez alapján: http://asus.ebond.hu/2008/07/28/oleg-firmware-telepitese-5resz-lighttpd/
    Most itt járok:
    [I] ipkg install lighttpd

    ipkg install openssl

    /opt/etc/init.d/S80lighttpd start [/I]
    Azt írja, hogy nem található ilyen :F

    [root@WL-0018F398E42B root]$ ipkg install lighttpd
    Installing lighttpd (1.4.22-1) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/lighttpd_1.4.22-1_mipsel.ipk
    package lighttpd suggests installing bzip2
    package lighttpd suggests installing e2fsprogs
    package lighttpd suggests installing libmemcache
    package lighttpd suggests installing libxml2
    package lighttpd suggests installing lua
    package lighttpd suggests installing memcached
    package lighttpd suggests installing sqlite
    package lighttpd suggests installing openldap-libs
    package lighttpd suggests installing mysql
    Installing pcre (7.9-1) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/pcre_7.9-1_mipsel.ipk
    Installing zlib (1.2.3-3) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/zlib_1.2.3-3_mipsel.ipk
    Installing libuclibc++ (0.2.2-8) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/libuclibc++_0.2.2-8_mipsel.ipk
    Installing openssl (0.9.7m-5) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/openssl_0.9.7m-5_mipsel.ipk
    Installing spawn-fcgi (1.6.2-1) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/spawn-fcgi_1.6.2-1_mipsel.ipk
    Configuring libuclibc++
    Configuring lighttpd
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    Configuring openssl
    Configuring pcre
    Configuring spawn-fcgi
    Configuring zlib
    Successfully terminated.
    [root@WL-0018F398E42B root]$ ipkg install openssl
    Package openssl (0.9.7m-5) installed in /opt/ is up to date.
    Nothing to be done
    Successfully terminated.
    [root@WL-0018F398E42B root]$ /opt/etc/init.d/S80lighttpd start
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    [root@WL-0018F398E42B root]$ /opt/etc/init.d/S80lighttpd start
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    [root@WL-0018F398E42B root]$ ipkg install lighttpd
    Package lighttpd (1.4.22-1) installed in /opt/ is up to date.
    Nothing to be done
    Successfully terminated.
    [root@WL-0018F398E42B root]$ ipkg install openssl
    Package openssl (0.9.7m-5) installed in /opt/ is up to date.
    Nothing to be done
    Successfully terminated.
    [root@WL-0018F398E42B root]$ /opt/etc/init.d/S80lighttpd start
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    [root@WL-0018F398E42B root]$
    [root@WL-0018F398E42B root]$ ipkg update
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/Packages.gz
    Inflating http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/Packages.gz
    Updated list of available packages in /opt/lib/ipkg/lists/optware
    Successfully terminated.
    [root@WL-0018F398E42B root]$ ipkg install openssl
    Package openssl (0.9.7m-5) installed in /opt/ is up to date.
    Nothing to be done
    Successfully terminated.
    [root@WL-0018F398E42B root]$ /opt/etc/init.d/S80lighttpd start
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found

  • HXY

    addikt

    válasz Intruder2k5 #6994 üzenetére

    sajna nem jó

    [root@WL-0018F398E42B root]$ ipkg -force-reinstall install lighttpd
    Reinstalling lighttpd (1.4.22-1) on /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/lighttpd_1.4.22-1_mipsel.ipk
    package lighttpd suggests installing e2fsprogs
    package lighttpd suggests installing libmemcache
    package lighttpd suggests installing lua
    package lighttpd suggests installing memcached
    package lighttpd suggests installing sqlite
    package lighttpd suggests installing mysql
    conffile_has_been_modified: conffile /opt/etc/lighttpd/lighttpd.conf has no md5sum
    conffile_has_been_modified: conffile /opt/etc/lighttpd/conf.d/01-default.conf has no md5sum
    conffile_has_been_modified: conffile /opt/etc/init.d/S80lighttpd has no md5sum
    Configuring lighttpd
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    Successfully terminated.
    [root@WL-0018F398E42B root]$ ipkg remove lighttpd
    Removing package lighttpd from /opt/...
    Successfully terminated.
    [root@WL-0018F398E42B root]$ ipkg install lighttpd
    Installing lighttpd (1.4.22-1) to /opt/...
    Downloading http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/lighttpd_1.4.22-1_mipsel.ipk
    package lighttpd suggests installing e2fsprogs
    package lighttpd suggests installing libmemcache
    package lighttpd suggests installing lua
    package lighttpd suggests installing memcached
    package lighttpd suggests installing sqlite
    package lighttpd suggests installing mysql
    Configuring lighttpd
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    Successfully terminated.
    [root@WL-0018F398E42B root]$ /opt/etc/init.d/S80lighttpd start
    Starting web server: lighttpd
    /opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
    [root@WL-0018F398E42B root]$

  • HXY

    addikt

    válasz Intruder2k5 #7010 üzenetére

    Megint nekifutottam..

    Az image visszaállítás utolsó részénél, valami hibát ír ki:

  • HXY

    addikt

    válasz HXY #7012 üzenetére

    közben rájöttem, hogy valamiért a nodes elől a kötőjelet nem másolja át...

Új hozzászólás Aktív témák